你好,请登录   免费注册    |    收藏本站
联系电话: 0574-87917803
联系电话: call_new 0574-87917803
HFF-1
HFF-1
规格:
货期:
编号:TS209410
品牌:Testobio
产品名称: HFF-1
商品货号: TS209410
Organism: Homo sapiens, human
Tissue: Skin; foreskin
Cell Type: Fibroblast
Product Format: frozen
Morphology: fibroblast
Culture Properties: Adherent
Biosafety Level: 1

Biosafety classification is based on U.S. Public Health Service Guidelines, it is the responsibility of the customer to ensure that their facilities comply with biosafety regulations for their own country.

Disease: Normal
Age: Newborn
Gender: male
Applications:
Can be used to produce feeder cells
Storage Conditions: Liquid nitrogen vapor phase
Derivation:
The cell line was established by ATCC in 2003 from normal human foreskin pooled from two individuals.
Clinical Data:
male
Comments:
The growth of these cells should be arrested before being used as a feeder layer. ATCC has successfully irradiated (SCRC-1041.1) and treated the cells with Mitomycin C (SCRC-1041.2) for use as a feeder layer. If the HFFs are being used as a feeder layer for ES cells, it is not recommended to use them past passage no. 50 (P50).xa0It is recommended that the feeder cells be plated 24 hours before use at 5X104xa0cells/cm2 in order to obtain a supportive monolayer for stem cell growth.
Complete Growth Medium: The base medium for this cell line is ATCC-formulated Dulbeccos Modified Eagles Medium, Catalog No. 30-2002. To make the complete growth medium, add the following components to the base medium:
  • fetal bovine serum to a final concentration of 15%

  • This medium is formulated for use with a 5% CO2 in air atmosphere. (Standard DMEM formulations contain 3.7 g/L sodium bicarbonate and a 10% CO2 in air atmosphere is then recommended).
    Subculturing:

    Procedure:
    To insure the highest level of viability, be sure to warm media and Trypsin/ EDTA to 37ºC before using it on the cells.

    Cells should be split when they reach confluency. A split ratio of 1:5 to 1:7 is recommended. Volumes used in this protocol are for 225 cm2 (T225); proportionally reduce or increase amount of dissociation medium for culture flasks of other sizes.

    1. Remove and discard culture medium.
    2. Briefly rinse the cell layer with 1X PBS (SCRR-2201) solution to remove all traces of serum, which contain trypsin inhibitor.
    3. Add 5 mL of Trypsin-EDTA (0.25% (w/v) Trypsin-0.53 mM EDTA solution, ATCC# 30-2101) solution to flask and incubate for 1 minute, gently tapping the flask observe cells under an inverted microscope until cells detach (usually within 1 to 2 minutes).
    4. Add 6.0 to 8.0 mL of complete growth medium and rinse surface of the flask to detach all cells. Gently pipetting up and down will break cell clumps.
    5. Transfer all cells into a centrifuge bottle or tube and centrifuge at 270 xg for 5 minutes.
    6. Remove and discard the supernatant
    7. Add 10 mL complete growth medium to cell pellet and with 10 mL pipette resuspend the cells gently (create a single-cell suspension).
    8. Add more complete growth medium to cell suspension as needed to plate cells at approximately 5x106/T225 flask.
    9. Place flasks in incubator @ 37°C with a 5% CO2 in air atmosphere.

    Flask/Platexa0

    xa0

    Cryopreservation:

    Growth Area (cm2)xa0

    xa0

    Culture Conditions:

    1xPBS (mL)xa0

    xa0

    Name of Depositor:

    Trypsin/EDTA (mL)xa0

    xa0

    Year of Origin:

    Equalxa0vol. Complete Growth Medium (mL)

    xa0

    References:

    Growth Medium (mL)xa0

    xa0

    首页 > 产品中心 > 微生物培养 > 菌株 > null > HFF-1

    HFF-1

    • 货号: TS209410
    • 好评
    询价
    • 品牌 : TESTOBIO
    产品名称: HFF-1
    商品货号: TS209410
    Organism: Homo sapiens, human
    Tissue: Skin; foreskin
    Cell Type: Fibroblast
    Product Format: frozen
    Morphology: fibroblast
    Culture Properties: Adherent
    Biosafety Level: 1

    Biosafety classification is based on U.S. Public Health Service Guidelines, it is the responsibility of the customer to ensure that their facilities comply with biosafety regulations for their own country.

    Disease: Normal
    Age: Newborn
    Gender: male
    Applications:
    Can be used to produce feeder cells
    Storage Conditions: Liquid nitrogen vapor phase
    Derivation:
    The cell line was established by ATCC in 2003 from normal human foreskin pooled from two individuals.
    Clinical Data:
    male
    Comments:
    The growth of these cells should be arrested before being used as a feeder layer. ATCC has successfully irradiated (SCRC-1041.1) and treated the cells with Mitomycin C (SCRC-1041.2) for use as a feeder layer. If the HFFs are being used as a feeder layer for ES cells, it is not recommended to use them past passage no. 50 (P50).xa0It is recommended that the feeder cells be plated 24 hours before use at 5X104xa0cells/cm2 in order to obtain a supportive monolayer for stem cell growth.
    Complete Growth Medium: The base medium for this cell line is ATCC-formulated Dulbeccos Modified Eagles Medium, Catalog No. 30-2002. To make the complete growth medium, add the following components to the base medium:
  • fetal bovine serum to a final concentration of 15%

  • This medium is formulated for use with a 5% CO2 in air atmosphere. (Standard DMEM formulations contain 3.7 g/L sodium bicarbonate and a 10% CO2 in air atmosphere is then recommended).
    Subculturing:

    Procedure:
    To insure the highest level of viability, be sure to warm media and Trypsin/ EDTA to 37ºC before using it on the cells.

    Cells should be split when they reach confluency. A split ratio of 1:5 to 1:7 is recommended. Volumes used in this protocol are for 225 cm2 (T225); proportionally reduce or increase amount of dissociation medium for culture flasks of other sizes.

    1. Remove and discard culture medium.
    2. Briefly rinse the cell layer with 1X PBS (SCRR-2201) solution to remove all traces of serum, which contain trypsin inhibitor.
    3. Add 5 mL of Trypsin-EDTA (0.25% (w/v) Trypsin-0.53 mM EDTA solution, ATCC# 30-2101) solution to flask and incubate for 1 minute, gently tapping the flask observe cells under an inverted microscope until cells detach (usually within 1 to 2 minutes).
    4. Add 6.0 to 8.0 mL of complete growth medium and rinse surface of the flask to detach all cells. Gently pipetting up and down will break cell clumps.
    5. Transfer all cells into a centrifuge bottle or tube and centrifuge at 270 xg for 5 minutes.
    6. Remove and discard the supernatant
    7. Add 10 mL complete growth medium to cell pellet and with 10 mL pipette resuspend the cells gently (create a single-cell suspension).
    8. Add more complete growth medium to cell suspension as needed to plate cells at approximately 5x106/T225 flask.
    9. Place flasks in incubator @ 37°C with a 5% CO2 in air atmosphere.

    Flask/Platexa0

    xa0

    Cryopreservation:

    Growth Area (cm2)xa0

    xa0

    Culture Conditions:

    1xPBS (mL)xa0

    xa0

    Name of Depositor:

    Trypsin/EDTA (mL)xa0

    xa0

    Year of Origin:

    Equalxa0vol. Complete Growth Medium (mL)

    xa0

    References:

    Growth Medium (mL)xa0

    xa0

    合作单位: